The basic method
Rinse 1 cup of whole mung beans, add about 3 cups of water or broth, and pressure cook on High for 8 to 10 minutes. Let the pressure release naturally for 10 to 15 minutes, then release any that remains. You do not need to soak whole beans first.
Times vary between recipes and models. Some recipes use 3 to 5 minutes for firmer beans, so start at the low end if you want them al dente, and check.
Before you start
- Rinse the beans until the water runs mostly clear.
- Soaking is optional. A 4 to 8 hour soak for whole beans shortens the pressure time, which is useful for more even cooking. Do you need to soak split mung beans? explains when a soak matters.
- Add 1 teaspoon of oil or ghee to reduce foaming.
- Fill the pot no more than halfway with beans or other foamy food. Foam can block the valve.
- Check the minimum liquid in your manual. Many models need at least about 1 to 1.5 cups.
Times and ratios
| Type | Beans | Liquid | High pressure | Release |
|---|---|---|---|---|
| Whole, unsoaked | 1 cup | 3 cups water or broth | 8 to 10 min | 10 to 15 min natural |
| Whole, soaked 4 to 8 hours | 1 cup | About 2 cups | 3 to 5 min | Natural |
| Yellow split dal | 1 cup | 3 to 4 cups | 5 to 6 min | 10 min natural |
| Khichdi (equal rice and split dal) | 1 cup combined | About 4 cups | 6 to 8 min | Natural |
Pressure time is not total time. The pot needs about 10 to 15 minutes to reach pressure, and the release adds more. Doubling a batch does not double the cook time, but a larger batch may need a little longer.
The khichdi row is a starting point. Ratios vary between recipes, so check yours.
Step by step
- Rinse the beans and drain them.
- If you want a tadka, set the pot to Sauté, heat the oil, and fry the spices first.
- Add the beans and the liquid. Scrape the bottom of the pot well, so no bits stick and trigger a Burn warning.
- Lock the lid, set the valve to Sealing, and pressure cook on High for the time in the table.
- When the cook time ends, let the pressure release naturally for 10 minutes or as the recipe says.
- Open the valve to release any remaining pressure. Wait for the float valve to drop before you open the lid.
- Taste and season with salt. Add lemon or tamarind at the end.
Fixes for common problems
- Beans are still firm. Pressure cook for a few more minutes. Older beans may need 2 to 5 minutes more. Acids such as tomato, lemon or tamarind slow softening, so add them after cooking. Salt does not stop softening.
- Beans are mushy. Reduce the time next time, especially for whole beans.
- Burn warning. Scrape the bottom well and deglaze after sautéing. For tomato-based dals, layer the tomato on top without stirring before you pressure cook.
- Foam. Add oil or ghee, do not overfill, and use a natural release of at least 10 minutes. A quick release can spray foam.
Flavor ideas
- Indian green moong dal: sauté cumin seeds, onion, ginger, garlic and tomato, then add turmeric, garam masala or chili powder and the beans.
- Filipino monggo guisado: sauté garlic, onion and pork or shrimp. Add the mung beans, water and leafy greens such as spinach or moringa, then pressure cook for about 10 minutes.
- Sweet mung bean soup: use much more water, about 10 cups per cup of beans, with rock sugar or brown sugar. Pressure cook for about 30 minutes, then check the texture.
Altitude and older beans
At high altitude, cooking takes longer. As a rough rule, add about 5% to the cook time for every 1,000 feet above 2,000 feet. Older beans also take longer, so plan for a few extra minutes when the pack has been on the shelf for a while.
Safety
- Never fill the pot above halfway with beans or foamy food.
- Use at least a 10-minute natural release for beans.
- Do not force the lid open. Wait for the float valve to drop.
Related reading
- Split vs whole mung beans compares stovetop and pressure times for each form.
- Mung beans guide covers the forms and buying tips.
- Mung beans vs lentils helps you decide when mung beans suit a dish better than lentils.